Sequence; Zoom - EverFocus EMV800 HD User Manual

4.5 Sequence

The sequence function is used to display each channel in sequence mode. To enable this
function:
Click the Sequence button
display one channel at a time in full screen. The channels will be displayed in the sequence and
for the amount of time as configured in the System > Display Setting > M/T SEQ submenu. The
default setting is channels 1~12 with a dwell time of 3 seconds each – repeated. Please refer to
6.5.2 M/T SEQ for detailed information.

4.6 Zoom

You can zoom in the camera view up to 4X and navigate the camera view using the mouse.
To enter the Zoom mode:
1. Select a camera and then click the Zoom button
the camera view to 2X. The ZOOM 2X stamp will be displayed on the top screen.
2. Navigate the camera view to the desired position by moving your mouse cursor over the
camera view. The mouse cursor will turn into a direction icon when you move your mouse
cursor to different portion on the camera view. Click directly on the screen can move to that
direction.
to enter the sequential switching mode. The mobile DVR will
55
EMV800 HD / EMV1200 HD Mobile DVR
on the OSD Root Menu to zoom in