Appendix E: Ir Remote Control - EverFocus EMV800 HD User Manual

Appendix E: IR Remote Control

The IR remote control is an accessory to enhance the convenient operation of the mobile DVR.
You can perform all the settings and operations from the remote control. The effective distance is
up to 33 feet line of sight.
To use the IR remote control, you need to set up the setting as below:
1. On the OSD menu, go to System > System Setting > IO Control.
2. Set up an IR Remote ID (Range 1~4), for example, set up "2".
3. Click Save.
4. Take the remote control to aim at the IR receiver of the mobile DVR.
5. Press the MDVR Device Number button "2".
6. Now, you will be able to use this remote control to operate the mobile DVR.
MDVR Device Number: The ID number here must correspond to
the "IR Remote ID" in "I/O Control Setup Menu". The buttons are
used to select a mobile DVR when there is more than one unit.
Selecting an incorrect unit ID will prevent the mobile DVR from
responding to commands from the remote.
Channel keys: #1~4 / #1~8 / #1~12. Press to display that channel in
full screen.
230
EMV800 HD / EMV1200 HD Mobile DVR
Appendix
E