Mobile - EverFocus EMV800 HD User Manual

7.3.6.3 Mobile

After connecting the 3G / 4G Receiver to the mobile DVR, you have to set up the mobile
settings for the mobile DVR to connect to the wireless network. Follow the steps below:
1. Connect the 3G / 4G Receiver to the mobile DVR. Please refer to the User's Manual of the
3G / 4G Antenna Module.
2. Select On from the GPRS Service drop-down list and select an authentication (CHAP or
PAP).
3. Insert the APN, Dial Number, User Name and Password provided by the network service
provider and then click the Connect button. The connection status will be displayed in the
Status field below. If it's connected successfully, the status will display "Success". And the
network information will be displayed in the fields below.
4. Click the Save button to save the settings. You can now use the IP for remote access to the
mobile DVR.
Note: If a message window pops up "Please insert a 3G modem", please reboot the mobile
DVR.
Dial Number
Status
Signal Strength
177
EMV800 HD / EMV1200 HD Mobile DVR
Connect