EverFocus EMV800 HD User Manual page 45

To set the mobile DVR for Internet Connection through router:
The next step is to open ports within your router. Log into the router using a PC and

open the following ports.
Ports to open: 80

If your Internet service provider blocks port 80, you can change it to a different port

in the mobile DVR's Network Menu Setup; open/forward that port instead.
If you are using a Linksys or D-Link router, see Appendix A for basic support on

setting up ports. For any other router, you will need to contact the manufacturer
for support.
To access the mobile DVR from a computer simply open Internet Explorer and in the

address bar type:
http:// (the IP address given by your internet service provider)
Note: If you changed to a different port other than 80, you will need to include this
at the end of the IP address:
http:// (the IP address given by your internet service provider):portnumber
If you have a WAN Dynamic IP address and have opened the ports, go to Chapter 7 to

setup DDNS.
EMV800 HD / EMV1200 HD Mobile DVR
35