Display - EverFocus EMV800 HD User Manual

4.4 Display

You can display system and camera status on the live view screen. Follow the steps below:
1. Click the Display button
front panel to display the system and camera status. You can continue click on the button to
switch among the display modes. There are four modes provided: (1) Display both the
camera and system status icons. (2) Display only the camera status icons. (3) Display only the
system status icons. (4) Hide both the camera and system status icons.
2. The following icons will be displayed at the top-right side of each camera stream to inform
the correct camera type to be connected.
Not 1080p Camera
3. The following icons will be displayed at the top-left side of each camera stream to show each
camera's status.
Recording
Alarm
4. The following icons will be displayed at the bottom of the monitor to show the system status.
Audio On
No network 1
HD temp. too
high
* The MDVR features Auto HDD Retry mechanism. Once the HDD has been installed, when
encounter HDD fail error, the MDVR will automatically reboot to detect the installed HDD up
to 3 times. Please refer to Appendix I: Auto HDD Retry Mechanism for more details.
on the OSD Root Menu or press the Display button on the
Not 720p Camera
Playback Fast forward
Motion Video loss
Audio Off
Main
Event
EMV800 HD / EMV1200 HD Mobile DVR
Fast backward
Uninstall
Alarm Motion
Call Sequence
GPS G-sensor
53
Back pause
Audio On Audio In
Video loss
HDD failure*
SD Card
Recording