EverFocus EMV800 HD User Manual page 83

Main / Sub Resolution: Select the most suitable resolution for the Main Stream and Sub
Stream. If you connect eZ.HD cameras (1080p) to the MDVR, the main stream resolution
option will display 1920x1080 only. If you connect eZ.HD cameras (720p) to the MDVR, the
main stream resolution option will display 1280x720 only. The Sub Stream is designed for
remote operation, such as remote live view and remote playback. Please refer to 7.2 Remote
Live View for more details.
Main Stream
eZ.HD Camera (1080p): 1920x1080
eZ.HD Camera (1080pH): 960x1080 *
eZ.HD Camera (720p): 1280x720
WD1 or D1 Camera: 960x480 / 704x480 / 352x240
* If you connect two eZ.HD cameras (1080p) to a pair of video inputs (say CH1 and CH2),
both of the maximum live resolution will be displayed as 1080p; however, the maximum
recording resolutions on CH1 and CH2 will get lower down to 1080pH (960x1080).
Record Quality: Select a recording quality for the Main Stream and Sub Stream. The options
include Low, Basic, Standard, High and Superior. The higher the quality, the more the HDD
space is used.
Normal Speed: Select a frame rate per second (FPS) for continuous recording. The speed is
limited by the maximum total recording capacity of the MDVR as allocated across all the
installed cameras, with upper limit of 30 FPS (NTSC) / 25 FPS (PAL) per individual camera
respectively (real time recording).
Event Speed: Select a frame rate per second (FPS) for event recording.
Ratio: Select 4:3 or 16:9 display aspect ratio of a camera, and its video will be displayed in 4:3
or 16:9 format on that channel screen.
Record Audio: Check the box to enable audio recording on the MDVR, and then select an
audio input device.
PTZ ID: To allow the DVR to recognize and then control the connected PTZ camera, you have
to set up an ID for the PTZ camera. Select On and then enter an ID for the camera. This ID
must match the ID address set up on the PTZ camera. For setting up the ID address on the PTZ
camera, please refer to the User's Manual of your PTZ camera.
PTZ Speed: Select a PTZ speed from the PTZ Speed drop-down list for the camera to move to
the directions when you use the direction buttons during the configuration period.
Save: Click to save the settings.
EMV800 HD / EMV1200 HD Mobile DVR
Sub Stream
352x240 / 176x120
73