EverFocus EMV800 HD User Manual page 167

2. Click Set All to set all area for motion detection, the selected area will be highlighted in
purple. Click Clear All to clear all the selected area.
You can also customize the motion area by clicking on each grid. Or drag a rectangle with
your mouse to enable (from top to bottom / upper-left to lower-right) or disable the
motion area (from bottom to top / lower-right to upper-left).
3. Set up the Sensitivity and Min Area for the motion grids.
Sensitivity: Sets up the motion sensitivity for the grids. The larger the number, the higher
the sensitivity.
Min Area: This function is designed to prevent false detections caused by small objects. If
you select 2, only the object size larger than 2-grid size can be detected.
4. Click the Save and Back button to save the settings and then return to the Motion menu.
EMV800 HD / EMV1200 HD Mobile DVR
157