User Group - EverFocus EMV800 HD User Manual

7.3.8.3 User Group

This setting page is used for configuring the privilege of the three access levels: Administrator,
Manager and Operator. Check the boxes under an access level to enable the privileges of that
access level. For example, if you check the Log (clear log) box under the Operator access level,
only the Operator has the privilege to clear log.
Manage User at Own Level: Check this box for the user of an access level to be able to
configure other users' settings of the same level at the User Management setting page (see
7.3.8.4 User Management). For example, if this box under the Operator level has been
checked, any user with the Operator privilege can go to the User Management setting page
to set up the settings of other Operators.
User Management: Check this box under an access level to enable the users of that level to
access the User Management and User Group setting page.
Save: Click to save the settings.
Import Notes for Account Privilege Definition
Users with the Administrator account have full privileges, so the checkboxes under the
Administrator access level will always be grayed out. The Administrator can grant privileges
to both the Manager and Operator while the Manager and Operator can also give certain
privileges to the lower level accounts based on the following rules.
EMV800 HD / EMV1200 HD Mobile DVR
195