EverFocus EMV800 HD User Manual page 17

5 Main Monitor (VGA)
6 D-Sub Connector
7 Main Monitor (BNC)
8 Call Monitor (BNC)
9 Audio Input
10 Video Input
11 DC Power Input
12 12VDC Power Outputs
VGA video output for connecting to the main monitor for live
view, playback and displaying OSD.
D-Sub connector for connecting to the Alarm I/O, RS-232 (CAN
bus) or RS-485 devices (such as analog PTZ cameras). For details,
please refer to 2.4.4 D-Sub Cable.
BNC video output for connecting to the main monitor for live
view, playback and displaying OSD.
Note the mobile DVR has 3 Main Monitor outputs (one on the
front panel and the other 2 on the rear panel). All of the Main
Monitor ports can be connected simultaneously.
BNC video output for connecting to the call monitor for
displaying the live view.
D-Sub connector for connecting to the supplied Audio Cable. For
details, please refer to 2.4.3 Audio Cable. Microphones with a
(built-in) amplifier and external power supply are required.
M12 connector for connecting to the supplied Video Cable. You
can then connect analog HD / SD cameras to the Video Cable.
* The MDVR doesn't support HD-TVI / HD-CVI / HD-SDI cameras.
Note that if you want to connect different resolution types of
cameras (1080p / 720p / D1) to the MDVR, there are some
instructions to follow, please refer to 2.5.2.1 Camera
Connection for more details.
Power harness cable for connecting to 9 ~ 36VDC power source.
For details, please refer to 2.4.1 Power Harness Cable.
12VDC power supply to the connected cameras (supply 12VDC,
500mA per camera). Please refer to 2.4.2 Video Cable / Power-
Out Cable.
7
EMV800 HD / EMV1200 HD Mobile DVR