ECOR HD 16X1 DVR
4.5 Sequence
The sequence function is used to display each channel in sequence mode. To enable this
function:
Click the Sequence button
to enter the sequential switching mode. The NVR will display
one channel at a time in full screen. The channels will be displayed in the sequence and for the
amount of time as configured in the System > Display Setting > M/T SEQ submenu. The default
setting is channels 1~4 / 1~8 / 1~16 with a dwell time of 3 seconds each – repeated. Please refer
to 6.5.2 M/T SEQ for detailed information.
4.6 Zoom
You can zoom in the camera view up to 4X and navigate the camera view using the mouse.
48