2.4.2
Connecting to a Car with 12 VDC
Glove box (inside or underneath)
Driver seat (between the seat and side panel)
+
Vehicle Battery
12V
-
Note:
1. If the car is without an ignition key, please connect the IGN (yellow) wire directly or
via a switch to the vehicle battery.
2. It is suggested to use a relay in the installation. Otherwise, the mobile DVR will always
draw the power from the vehicle battery.
Passenger seat (underneath)
ACC
IGN (Yellow)
Relay (12V)
12V+ (Red)
GND (Black)
17
EMV800 HD / EMV1200 HD Mobile DVR
Trunk
EMV1200 HD (Rear Panel)
Power Harness Cable
Fuse (15A)