4.1.6.4 Maintain
This function is currently reserved. You can upgrade BIOS, System firmware or APP through the
USB device; reset the DVR to factory default settings, delete system log or event log in this
menu. For Default Setting, click the OK button to bring up the Reset To Factory menu, select
the desired items and click the Apply button.
4.1.7 Display
You can configure the display settings including setting up the Sequence Mode for Main / Spot
monitor and resolution. Note that only the 16CH model supports Spot monitor.
【Main Interval】: Set up the sequence interval for displaying the channels on the Main monitor.
【Spot Interval】: Set up the sequence interval for displaying the channels on the Spot monitor.
Note that only the 16CH model supports Spot monitor.
32
TUTIS Series DVR