Table of Contents
Advertisement
Appendix E: IR Remote Control
The IR remote control is an accessory to enhance the convenient operation of the DVR. You can
perform all the settings and operations from the remote control. The effective distance is up to 33
feet line of sight.
When there is more than one DVR installed in the same environment, you need to select a correct
DVR ID, preventing the DVR from responding to commands from the Remote Control.
To select the DVR ID,
1.
Aim at the IR receiver of your DVR.
2.
Select the DVR ID number by pressing the DVR Device ID Button first.
The DVR ID number here must correspond to the "IR Remote ID"
set up in the "I/O Control Menu", and remember to click Save on
that setting page (refer to 6.9.5 I/O Control).
For example, if you set up "2" in the OSD setting page, you
need to press "2" on the controller.
3.
Now you can control the DVR.
155
PARAGON FHD 16x4
Appendix
E
DVR Device ID
Button
Channel
Button
Advertisement
Table of Contents
