Startup Mode - Aastra Ascotel IntelliGate 150 System Manual

Ascotel® IntelliGate® 150/300 as of I7.9
6. 5. 4. 1

Startup Mode

Startup begins as soon as power is supplied or after a restart/first start, and ends
when the system enters Normal Mode. The LED combination patterns 1...9 indicate
the individual startup phases in chronological order and also serve as a progress in-
dicator.
Tab. 85 Combination patterns during startup
Pattern
F0 F1
No.
1
2
3
4
5
6
7
8
9
The startup phase is now completed and the system switches to Normal Mode. The
pilot key now accepts inputs; the terminal displays are visible shortly thereafter.
Thorough RAM test
To carry out a thorough RAM test during startup, press the pilot key briefly (SC) dur-
ing the orange LED test (pattern 2). Pattern 10 is displayed during the thorough
RAM test instead of pattern 4.
Tab. 86 Patterns during the thorough RAM test
Pattern
F0 F1
No.
10
The startup continues normally after the thorough RAM test.
182
F2 F3 F4
F2 F3 F4
Dura-
SYS tion Meaning
[s]
~1,5 Red LED test
~1,5 Orange LED test
~1,5 Green LED test
~4 RAM self-test
~4 Startup State
~1 Preparing system software loading
~25 Loading the system software
~1,5 System software successfully loaded
~25 System software starting up
Dura-
SYS Meaning
tion [s]
~60 RAM self-test (thorough)
Operation and Maintenance