Special Interfaces; Equipment On The Odab Options Card - Aastra Ascotel IntelliGate 150 System Manual

4. 7. 4

Special Interfaces

4. 7. 4. 1

Equipment on the ODAB options card

The ODAB options card contains the following equipment:
• 1 analogue terminal interface for connecting a door intercom
• Relay outputs and control inputs for connecting a door intercom and/or other
purposes.
With the aid of jumpers the options card is configured for connecting a door inter-
com or provides control inputs and relay outputs:
• In the configuration as a door intercom the option card must be fitted to slot IC2
(A150) or IC4 (A300). The interfaces are then available at RJ45 sockets 2.1...2.3
(A150) and 4.1...4.3 (A300).
• If the option card is used for other purposes, it must be fitted to slot IC1 (A150)
and IC1...3 (A300). The RJ45 socket x.1 then provides two relay outputs and the
RJ45 socket x.2 two control inputs.
LINK /
LAN
LAN
Fig. 57 Interfaces of the ODAB options card
Connection of a door intercom (TFE)
If the options card is fitted to slot IC2 (A150) or slot IC4 (A300), an analogue termi-
nal interface is available for connecting a door intercom.
Note:
This analogue terminal interface cannot be used for other purposes as
the software does not support it.
Installation
Ascotel® IntelliGate® 150/300 as of I7.9
a/b AD2 AD2
0.3 0.5
0.4 0.6
a/b AD2 AD2
x.1
0.7
0.8 x.2
x.3
x.4
113