Operating Modes Of The Handsets For Test Purposes; Look Around Mode - Aastra Ascotel IntelliGate A150 System Manual

3.5.3

Operating modes of the handsets for test purposes

All Office 135/135pro handsets are able to perform various measurements for test
purposes. Three different modes of operation are available:
• "Look Around Mode"
Up to 32 RUs can be logged and their parameters displayed.
• "Show Measurement Mode"
Display of the current RU's connection parameters
• "Show Handover Mode"
Acoustically and/or visually indicates the handover to another radio unit during
a connection.
Additional test HA functions are available in "Look Around Mode" which make it
easy to measure out a DECT system. For example only the test HAs are able to set up
a call via a test RU. In the following chapters we deal in particular with the different
modes of operation. The possibilities for the test HA are duly noted in each case.
3.5.3.1

Look Around Mode"

Activating the "Look Around Mode" on a Switched Off HA:
1. Switch handset on
2. During search press the C key: "No System" appears
3. Long-click key 4
Note:
If the handset is already connected to a system, long-click 4 does not
switch to "Look Around Mode" but rather to "Show Measurement Mode"
(see Show Measurement Mode",page
Planning DECT systems
Ascotel® DECT System
58)
41