Wiring Adapter - Aastra Ascotel IntelliGate 150 System Manual

Ascotel® IntelliGate® 150/300 as of I7.9
Notes
– The ODAB options card must be fitted to slot IC2 (A150) or slot IC4
(A300) if it is to be used for connecting a door intercom (see
ment on the ODAB options card", page
– The AD2 terminal cards EAD4V and EAD4C cannot be fitted to slot IC4
of an A300 due to their mechanical dimensions.
4. 5. 2

Wiring Adapter

Wiring adapters are used to route the interfaces of the interface cards to the RJ45
sockets on the front panel and are fitted to slots WA1...WA4. Slot WA0 is equipped
only in combination with the LAN switch module SM-LAN8. Slots WA3 and WA4 are
to be found only on the A300 (see also
The table below provides an overview of the combinations of wiring adapters and
interface cards. Unless specified otherwise, the corresponding wiring adapter is in-
cluded in the equipment supplied with each interface card.
Tab. 22 Combinations of wiring adapters / interface cards
Wiring Adapter
WA-TS0
WA-TS1
78
Plug-in
Interface card orienta-
tion
TIC-4TS TTTT
TIC-4TS STTT
TIC-2TS TTTT
TIC-2TS STTT
1)2)
ESST-2 STTT
1)
TIC-4TS SSTT
1)
TIC-4TS SSST
1)
TIC-2TS SSTT
1)
TIC-2TS SSST
1)2)
ESST-2 SSTT
1)2)
ESST-2 SSST
ODAB SSTT
113).
Fig. 8).
Port number
X.1 X.2
T T
S T
T T
S T
S T
S S
S S
S S
S S
S S
S S
I/O 1.2 I/O 3,4
"Equip-
X.3 X.4
T T
T T
– –
– –
– –
T T
S T
– –
– –
– –
– –
ab/Door –
Intercom
Installation