Initialization Password; Password Syntax - Aastra Ascotel IntelliGate 150 System Manual

user is authorized to configure offline without entering his password
(auto login). If the PBX password is identical to the user's password, he
can even access the PBX without password and configure online.
5. 3. 2. 1

Initialization password

To access the default user account enter the following:
Tab. 73 First Start password
User name
Password
It is advisable to change the password immediately to prevent unauthorized access
to the user access control.
The initialization passwords are the same in the PBX and AIMS.
Note:
It is not possible to configure the PBX with a first start password. During
the initial commissioning or after initialization you are prompted to
change the initialization password during the connection set-up with the
PBX. This ensures that unauthorized personnel cannot manipulate the
PBX from a distance once access for remote maintenance has been ena-
bled.
5. 3. 2. 2

Password syntax

The following rules apply to password selection and spelling:
• A password must consist of a minimum of 8 and a maximum of 10 alphanumeri-
cal characters.
• Unlike the user names, the passwords are case sensitive.
• The following special characters can be used: ?, /, <, >, -, +, *, #, =,. and space.
• German umlauts (e. g. ä, ö, ü) and other diacritical characters (e.g. é, à, â) are not
permitted.
• The standard passwords 1Ascotel, 2Ascotel, 3Ascotel and 4Ascotel are not per-
mitted.
• The password must not be the same as the user name.
Configuration
Ascotel® IntelliGate® 150/300 as of I7.9
admin
3ascotel
141