Section 5 - General Specifications And Operator Maintenance; Introduction; Supplemental Information - JLG 4394RT Operation And Safety Manual

SECTION 5. GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
5.1

INTRODUCTION

This section of the manual provides additional necessary
information to the operator for proper operation and
maintenance of this machine.
The maintenance portion of this section is intended as
information to assist the machine operator to perform
daily maintenance tasks only, and does not replace the
more thorough Preventive Maintenance and Inspection
Schedule included in the Service and Maintenance Man-
ual.
Other Publications Available Specific to this Machine:
Service and Maintenance Manual......................................3121642
Illustrated Parts Manual .........................................................3121643
3121641

SECTION 5 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE

5.2

SUPPLEMENTAL INFORMATION

The following information is provided in accordance with
the requirements of the European Machinery Directive
2006/42/EC and is only applicable to CE machines.
For electric powered machines, the equivalent continuous
AWeighted sound pressure level at the work platform is
less than 70dB(A).
For combustion engine powered machines, guaranteed
Sound Power Level (LWA) per European Directive 2000/ 14/
EC (Noise Emission in the Environment by Equipment for
Use Outdoors) based on test methods in accordance with
Annex III, Part B, Method 1 and 0 of the directive, is 109 dB.
The vibration total value to which the hand-arm system is
subjected does not exceed 2,5 m/s2. The highest root
mean square value of weighted acceleration to which the
whole body is subjected does not exceed 0,5 m/s2.
– JLG Lift – 5-1