Pre-Start Inspection - JLG 4394RT Operation And Safety Manual

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION

Pre-Start Inspection

The Pre-Start Inspection should include each of the follow-
ing:
1. Cleanliness – Check all surfaces for leakage (oil, fuel,
or battery fluid) or foreign objects. Report any leakage
to the proper maintenance personnel.
2. Structure - Inspect the machine structure for dents,
damage, weld or parent metal cracks or other discre-
pencies.
Parent Metal Crack
3. Decals and Placards – Check all for cleanliness and
legibility. Make sure none of the decals and placards
are missing (refer to the Decal Installation in Section
3). Make sure all illegible decals and placards are
cleaned or replaced.
2-4
Weld Crack
IF THE MACHINE DOES NOT OPERATE PROPERLY, TURN OFF THE MACHINE
IMMEDIATELY! REPORT THE PROBLEM TO THE PROPER MAINTENANCE PER-
SONNEL. DO NOT OPERATE THE MACHINE UNTIL IT IS DECLARED SAFE FOR
OPERATION.
– JLG Lift –
4. Operators and Safety Manuals – Make sure a copy of
the Operator and Safety Manual, AEM Safety Manual
(ANSI markets only), and ANSI Manual of Responsibili-
ties (ANSI markets only) is enclosed in the weather
resistant storage container.
5. "Walk-Around" Inspection – Refer to Figure 2-1.
6. Battery – Charge as required.
7. Fuel (Combustion Engine Powered Machines) – Add
the proper fuel as necessary.
8. Hydraulic Oil – Check the hydraulic oil level. Ensure
hydraulic oil is added as required.
9. Function Check – Once the "Walk-Around" Inspection
is complete, perform a functional check of all systems
in an area free of overhead and ground level obstruc-
tions. Refer to Section 4 for more specific instructions.
3121641