Section 2. User Responsibilities, Machine Preparation And Inspection; 2.1 Personnel Training; Operator Training; Training Supervision - JLG 4394RT Operation And Safety Manual

SECTION 2. USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION

2.1 PERSONNEL TRAINING

The aerial platform is a personnel handling device; so it is
necessary that it be operated and maintained only by
trained personnel.
Persons under the influence of drugs or alcohol or who are
subject to seizures, dizziness or loss of physical control
must not operate this machine.

Operator Training

Operator training must cover:
1. Use and limitations of the controls in the platform and
at the ground, emergency controls and safety systems.
2. Control labels, instructions, and warnings on the
machine.
3. Rules of the employer and government regulations.
4. Use of approved fall protection device.
5. Enough knowledge of the mechanical operation of
the machine to recognize a malfunction or potential
malfunction.
3121641
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
– JLG Lift –
6. The safest means to operate the machine where over-
head obstructions, other moving equipment, and
obstacles, depressions, holes, dropoffs.
7. Means to avoid the hazards of unprotected electrical
conductors.
8. Specific job requirements or machine application.

Training Supervision

Training must be done under the supervision of a qualified
person in an open area free of obstructions until the
trainee has developed the ability to safely control and
operate the machine.

Operator Responsibility

The operator must be instructed that he/she has the
responsibility and authority to shut down the machine in
case of a malfunction or other unsafe condition of either
the machine or the job site.
2-1