Checking The Frame; Checking The Swingarm; Checking The Throttle Cable Routing - Husqvarna TC 125 2017 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.40

Checking the frame

11.41

Checking the swingarm

11.42

Checking the throttle cable routing

–
Check the frame for cracks and deformation.
» If the frame exhibits cracks or deformation due to a mechanical impact:
–
Change the frame.
M01314-01
–
Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
401520-01
Preparatory work
(All TC models)
–
Turn handle
(Figure F00230-10
(TX 300)
–
Turn handle
(Figure F00231-10
–
Remove the air filter box cover. (
–
Remove the seat. (
–
Remove the right side cover. (
–
Remove the fuel tank.
Main work
(TC 125)
–
Check the throttle cable routing.
The throttle cable must be routed along the back of the handlebar, to the
right of the frame, above the fuel tank bracket, and to the carburetor. The
throttle cable must be secured behind the fuel tank contact area rubber
band.
» If the throttle cable is not routed as specified:
–
H01554-01
Info
Always replace a frame that has been damaged due to a mechan-
ical impact. Repair of the frame is not authorized by Husqvarna
Motorcycles.
Info
Always change a damaged swingarm. Repair of the swingarm is
not authorized by Husqvarna Motorcycles.
 of the fuel tap to the OFF position.
p. 16)

of the fuel tap to the OFF position.
p. 16)
p. 55)
p. 53)
p. 60)
( p. 61)
Correct the throttle cable routing.
68