Checking The Frame; Checking The Link Fork - Husqvarna TC 85 19/16 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.39
11.40
70
400985-01
H02532-01

Checking the frame

V00858-01

Checking the link fork

V00857-01
–
Check the chain guide for wear.
Info
Wear can be seen on the front of the chain guide.
» If the light part of the chain guide is worn:
–
Change the chain guide.
–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining
screws, chassis
Remaining nuts,
chassis
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for cracks and deformation.
» If the frame exhibits cracks or deformation due to a
mechanical impact:
–
Change the frame.
Info
Always replace a frame that has been
damaged due to a mechanical impact. Repair
of the frame is not authorized by Husqvarna
Motorcycles.
–
Check the link fork for damage, cracking, and deformation.
» If the link fork shows signs of damage, cracking, or defor-
mation:
–
Change the link fork.
Info
Always replace a damaged link fork. Husq-
varna Motorcycles does not permit repairing
link forks.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 46)