Mounting The Seat - Husqvarna TC 125 2017 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.21

Mounting the seat

Main work
(All TC models)
–
Remove screw
–
Pull seat back and lift it off.
F00237-10
(TX 300)
–
Remove screw
–
Pull seat back and lift it off.
F00107-10
Main work
(All TC models)
–
Mount the front of the seat on the collar bushing of the fuel tank and the rear
in the bracket.
–
Push the seat forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten screw
Guideline
Remaining screws, chassis
F00238-10

.

.

.
M6
54
10 Nm (7.4 lbf ft)