Removing The Air Filter Box Cover - Husqvarna TC 125 2017 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.22

Removing the air filter box cover

(TX 300)
–
Mount the front of the seat on the collar bushing of the fuel tank and the rear
in the bracket.
–
Push the seat forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten screw
Guideline
Remaining screws, chassis
F00108-10
Finishing work
–
Install the air filter box cover. (
(All TC models)
–
Pull off the air filter box cover sideways in areas
toward the front.
F00242-10
(TX 300)
–
Pull off the air filter box cover sideways in areas
toward the front.
F00245-10

.
M6
p. 56)

,

,
55
10 Nm (7.4 lbf ft)
 
and , and remove
 
and , and remove