Checking The Rear Brake Fluid Level - Husqvarna TC 125 2017 Owner's Manual

12 BRAKE SYSTEM
12.10

Checking the rear brake fluid level

Warning
Danger of accidents An insufficient brake fluid level will cause the brake system to fail.
If the brake fluid level drops below the specified marking or the specified value, the brake system is leaking or the brake
linings are worn down.
–
Check the brake system and do not continue riding until the problem is eliminated. (Your authorized Husqvarna Motorcy-
cles workshop will be glad to help.)
Warning
Danger of accidents Old brake fluid reduces the braking effect.
–
Make sure that brake fluid for the front and rear brake is changed in accordance with the service schedule. (Your autho-
rized Husqvarna Motorcycles workshop will be glad to help.)
–
Detach spring
–
Loosen nut
travel.
–
To adjust the basic position of the foot brake lever to individual requirements,
loosen nut
Info
The range of adjustment is limited.
–
Turn push rod
the basic position of the foot brake lever.
Guideline
Free travel at foot brake lever
–
Hold screw
Guideline
Nut, foot brake lever stop
–
Hold push rod
Guideline
K00534-10
Remaining nuts, chassis
–
Attach spring
Preparatory work
–
Check the rear brake linings. (
Main work
–
Stand the vehicle upright.
–
Check the brake fluid level in level viewer
»
If the brake fluid has dropped below marking
–
Add rear brake fluid.
K00535-10

.
 
and, with push rod
 
and turn screw accordingly.

accordingly until you have free travel
 
and tighten nut .
 
and tighten nut

.
p. 79)
( p. 78)
, turn it back until you have maximum free

. If necessary, adjust
3... 5 mm (0.12... 0.2 in)
M8 20 Nm (14.8 lbf ft)
.
M6 10 Nm (7.4 lbf ft)

.

:
77