Carburetor - Basic Setting For Sandy Surfaces (Tc 250) - Husqvarna TC 125 2017 Owner's Manual

21 TECHNICAL DATA
21.3.4 TC 250
Carburetor type
Carburetor identification number
Needle position
Jet needle
Main jet
Idling jet
Starting jet
Needle jet
Idle air adjusting screw
Open
21.3.5

Carburetor - basic setting for sandy surfaces (TC 250)

Idle air adjusting screw
Open
Idling jet
Jet needle
Needle position
Main jet
Info
If the engine is not running smoothly, use a smaller main jet.
MIKUNI TMX 38
TMX 38 84
3rd position from top
6BFY43-73 (6BFY44-73)
440 (430, 450, 460)
42.5 (45/47.5)
80
S‑1
1.5 turns
1.5 turns
45
6BFY44‑73
3rd position from top
480
119