Cooling System; Radiator Cover (Tc 125); Installing The Radiator Cover (Tc 125) - Husqvarna TC 125 2017 Owner's Manual

15

COOLING SYSTEM

15.1 Cooling system
15.2

Radiator cover (TC 125)

15.3

Installing the radiator cover (TC 125)

(TC 125)
Water pump
The pressure resulting from the warming of the cooling system is regulated by a
valve in radiator cap
coolant temperature will not result in a risk of malfunctions.
120 °C (248 °F)
Cooling is effected by the air stream.
The lower the speed, the less the cooling effect. Dirty cooling fins also reduce the
cooling effect.
S01292-11
(TC 250, TX 300)
Water pump
The pressure resulting from the warming of the cooling system is regulated by a
valve in radiator cap
coolant temperature will not result in a risk of malfunctions.
120 °C (248 °F)
Cooling is effected by the air stream.
The lower the speed, the less the cooling effect. Dirty cooling fins also reduce the
cooling effect.
S01293-11
The radiator cover is mounted in front of the left radiator between the radiator shield
and radiator.
The radiator cover keeps the coolant temperature in the correct range.
Coolant temperature
S01296-01
The radiator cover is installed in front of the left radiator, depending on the ambient
temperature.
Full radiator cover
Half radiator cover
No radiator cover
Info
M01121-10
Do not use both radiator covers at the same time.
–
Remove screws
–
Remove screws
–
Take off radiator shield
S01294-10

in the engine ensures forced circulation of the coolant.

. This ensures that operating the vehicle at the specified

in the engine ensures forced circulation of the coolant.

. This ensures that operating the vehicle at the specified
65... 70 °C (149... 158 °F)
 < 7 °C (< 45 °F)
7... 16 °C (45... 61 °F)

> 16 °C (> 61 °F)

.

.

.
90