Table of Contents
Advertisement
Features and MenuCards
5 Change PIN: Enter your old user PIN then enter your new PIN twice. Contact your
system administrator if you have forgotten your user PIN. Your user PIN can have up to
six characters.
6 Delete keys: After you have entered your user PIN, all functions and numbers that
you have assigned to the keys are deleted.
7 Availability: All active features that hinder your availability (call protection, call for-
warding, call waiting protection), are cleared.
8 Call wait. prot.: (call waiting protection) During a telephone conversation, no
further calls are signalled by the call waiting tone. The new caller hears the busy tone.
Activate the function with On. When there are multiple trunk keys configured on your
telephone, you can switch call waiting protection for each of these keys on or off. To
do so, select the desired key from the displayed list and press
. If call waiting
protection should apply to all configured trunk keys, select the Device menu entry
and press
. You can switch call waiting protection on or off using the plus/minus
key
.
Note
Call-waiting protection is only activated on the telephone on which it was set. If your
internal call number is also stored on the trunk or team keys of other telephones,
call-waiting protection is not automatically activated on these telephones.
9 Intercom prot.: (Intercom protection) Switching on (On) or switching off (Off )
intercom protection. When intercom protection is activated, no intercom announce-
ments can be made to your telephone (see also page 56).
MenuCard "Connections"
Note
The following features are carried out if this is permitted by the current call state of
your telephone. These features are also in the call-dependent MenuCards. Some en-
tries in the Connections MenuCard are only shown when you programme the func-
tion onto a function key (please refer also to the chapter Programming Functions
(Features) starting on page 100).
88
Advertisement
Table of Contents
