Table of Contents
Advertisement
Features and MenuCards
1 Time control: In the OpenCom 100 / Aastra 800 several time groups can be con-
figured. Depending on the activated time group, incoming calls are signalled on dif-
ferent telephones. Switching between these time groups can be done manually or
automatically, in this case according to a timetable configured by the system adminis-
trator.
You can only program these functions if the system administrator has activated the
"Time control" authorisation for your user group.
Select Automatic to activate automatic time control. The configured time groups
then change automatically according to the timetable configured by the system
administrator. This setting remains active until one of the available time groups is set
manually.
The system administrator can configure up to ten time groups. The time groups are
either numbered (default setting) or they have been given names by the system
administrator. You can manually select a specific time group; the automatic time
control is then deactivated.
Note
A "MSN" forward will always – independent of the currently active time group – re-
main in effect.
2 Date/Time: The date and time are taken over from the exchange on the first
external outgoing call. If this information is not transmitted by your network operator,
you can set the date and time here yourself.
You can only program these functions if the system administrator has activated the
"Configurator - active" authorisation for your user group.
Select the required entry (time with hh:mm, date with dd.mm.yy) and press
.
Overwrite the current setting and confirm the new setting with
.
Save the settings.
96
Advertisement
Table of Contents
