Programming The Call Keys; Menucard "Prog. Call Key" (Trunk Key) - Aastra OpenPhone 61 User Manual

Hide thumbs Also See for OpenPhone 61:
Table of Contents

Advertisement

For information on how to program the function keys, please refer to the chapter
entitled Programming Functions (Features) starting on page 100.

Programming the Call Keys

The call keys are configured in the Configurator on the OpenCom 100 / Aastra 800
Web console. For system telephones, you can configure the following:
the type of key (trunk key, team key, busy key or direct-call key),
the telephone number and the text currently assigned to the key,
the call-signalling mode for this key.
You can change the pre-settings for the text and the call signalling mode on the
appropriate key's MenuCard (see the following sections: MenuCard "Prog. call key"
(Trunk Key) on page 69 and MenuCard "Prog. team key" on page 71) as well as most of
the settings for supported features.
If the configuration of a call key is changed in the Configurator, the telephone will
load the new settings and not be operational for a few moments. For more infor-
mation on the configuration, refer to the online help of the OpenCom 100 /
Aastra 800.

MenuCard "Prog. call key" (Trunk Key)

Press and hold down the trunk key
1 Modify text: You will see the text currently assigned to the key. This text is displayed
on the display of your telephone. To change the text, press
text with the
with Save. If you delete the text, only the key's call number will be displayed.
2 Call diversion: You can configure one or more types of call forwarding for the trunk
key (Immediately, After delay, Busy), see the section entitled MenuCard
"Call Forwarding" starting on page 80. The call forwarding mode configured for a
trunk key only applies to that key, not the telephone.
3 Substitution: You can forward calls for this trunk key to another member of the
team. Select Substitute and choose one of the team members from the list. Press
. Select On / Off to switch the substitution function on or off.
for a moment, then select ...
key and enter new text, if required. Press
Team Functions
. Delete the existing
and confirm this
69

Advertisement

Table of Contents
loading

This manual is also suitable for:

Openphone 63Openphone 65

Table of Contents