Table of Contents
Advertisement
System Telephones on the OpenCom 100 / Aastra 800
Selecting the Function Level
You switch levels by using the level key
line of the display tell you which level is set.
Operating the Keypad Module Keys
The keys of the keypad module are operated in the same way as programmed keys, as
described in this user guide (see the following sections: Programming Call Numbers
(Destinations) starting on page 99, Programming Functions (Features) starting on
page 100, and Programming the Call Keys starting on page 69).
Before programming a key, you must always select the desired level. All MenuCard
displays related to the keys of an add-on device are shown in the display of the basic
device.
External Audio Devices
Configuring Audio Devices
You use the 7 Add-on adapter menu in the Phone settings menu group to configure
and activate the audio devices connected to your system telephone (OpenPhone 63
or OpenPhone 65).
In the Main menu you select 4 Phone settings, then 7 Add-on adapter, followed
by ...
•
Under the menu item 1 Add-on selection you enter the type of analogue audio
device connected to socket 1, or deactivate the socket. Select the type of device
that is to be activated (Ear cap, Second handset, Headset, Active speaker box,
Ext. microphone, DECT-Headset). Select Off to temporarily deactivate the
socket.
•
Use the menu item 2 Add-on volume to adjust the volume of the device.
•
Under the menu item 3 Relay selection you enter the type of device connected
(via a relay to socket 2 or socket 4), or deactivate the socket. Only one of the device
types can be selected for activation: Record (recording equipment connected to
socket 2) or Door display ("Door busy" indicator connected to socket 4). Select off
to temporarily deactivate the socket.
Program one or, if necessary, several function keys to activate/deactivate the con-
nected audio devices. You can then switch devices (e.g. a headset) on and off by
30
at the lower right. The icons in the top
Advertisement
Table of Contents
