Table of Contents
Advertisement
Printing Label Strips
Using the Configurator of the Web console, you can print the labels for a selected
system telephone with the current key assignment (Telephony: Devices: System
phones menu).
Labelling Function Keys
If you have programmed a function key then you can enter a label for this key which
will be shown in the display. You will find further information in the section Pro-
gramming a Function onto a Key starting on page 101.
Add-ons
On the back of the OpenPhone 63 and the OpenPhone 65you will find sockets to
which add-ons and accessories can be connected, either directly or via various
adapters:
•
one socket on the OpenPhone 63, and
•
two sockets on the OpenPhone 65.
The following components are supported by the OpenCom 100 / Aastra 800:
•
U
adapter
pn
•
a/b adapter
•
Power supply
(on a U
adapter and on an a/b adapter)
pn
•
Audio adapter
The OpenPhone 63 and the OpenPhone 65 can be expanded as follows:
•
the OpenPhone 65 by up to three keypad modules.
Keypads are connected directly to the telephone (i.e. without adapters).
Please refer to the chapter entitled The Keypad Module on the OpenPhone 65
starting on page 29.
•
OpenPhone 63 and OpenPhone 65 can each be expanded by the connection of a
second OpenPhone.
A second telephone is connected via a U
adapter, if this is necessary. Only a limited number of system telephones can be
connected in this way for operation as second telephones.
System Telephones on the OpenCom 100 / Aastra 800
adapter and in addition via an AC
pn
11
Advertisement
Table of Contents
