Function 37: Rfid Programming - ESI ivx e-class series Administrator's Manual

IVX E-Class Administrator's Manual
13. Trunk-to-trunk transfer — When enabled, this lets the station user initiate a trunk-to-trunk transfer.
The user, while connected to a CO line, can press TRANSFER, dial an off-site number and then
complete the trunk-to-trunk transfer by simply hanging up. Both outside parties are then connected.
A station user also can set up a conference call and then drop out of the conference, leaving the
other members conferenced.
This feature must be enabled for external call forwarding to succeed.
Default: Enabled.
Important: USE OF FEATURES, SUCH AS TRUNK-TO-TRUNK TRANSFER, THAT REQUIRE
TRUNK-TO-TRUNK CONNECTIONS WILL INCREASE THE RISK OF TOLL FRAUD. IN
NO EVENT SHALL ESI (ESTECH SYSTEMS, INC.) BE LIABLE FOR ANY DIRECT, INDI-
RECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER INCLUDING, BUT
NOT LIMITED TO, FRAUDULENT TOLL CHARGES, LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTIONS OR ANY OTHER COSTS OR DAMAGES RELATED
THERETO ARISING FROM THE USE OF THESE FEATURES.
14. Unified messaging — Allows or denies VIP access. (For more information about VIP, consult your
ESI Reseller.)
Example: Here is a portion of a completed Programming Worksheet for extension feature authori-
zation. Note that:
• Extension 100 cannot record calls but can make toll calls (except those listed in the
deny table) and can access the system speed dial numbers.
• In comparison, Extension 102 cannot make general toll calls but also can call any
system speed dial number, even if it's a toll call.
• (Extension 112 doesn't have DND, AA block, record or service observing capability
because it's an analog port.)
1. 2.
Ext. Name
100 Jane
102 Sally
Bill
112*

Function 37: RFID programming

This function relates to IVX Presence Management only, and covers several steps needed to:
• Program RFID tags.
• Access scheduling.
• View tag numbers.
• Set IVX Presence Management parameters.
For more information, see the IVX Presence Management Administrator's Manual (ESI # 0450-0795).
* An example of an analog phone.
3. 4. 5. 6.
Call AA Svc.
wait DND block Rec. obsv.
Y Y N N
Y Y N Y
Y N
Function 3: Extension programming
7. 8. 9. 10.
Toll Sys. Auto-
allow spd. dial Page
N Y Y N
N N Y Y
Y Y N
11. 12. 13. 14.
Ext. Fwdg. Trk-to-
Unified
fwdg. to toll trk xfer
msg.
nos.
N N N N
N N N N
N N N
C.3