Function 17: System Speed-Dial - ESI ivx e-class series Administrator's Manual

IVX E-Class Administrator's Manual

Function 17: System speed-dial

Up to 100 system speed dial names and associated numbers can be stored, in location numbers 600–699,
for access by any station. A user can initiate a system speed-dial by dialing the speed dial location number
or by accessing the name through the Esi-Dex feature. In Function 32, access to system speed-dial can
be denied to individual stations (see page C.1).
Note: System speed-dialing overrides toll restrictions (Function 32, page C.1).
1. Enter the 3-digit location number to program,
2. Enter a ten-character name (see "Entering alphanumeric characters," page A.4).
3. Enter the number to be dialed (including the line group 9, 8, or 71–76). Press the left scroll key ( )
to delete any character or digit entered in error. Here's an example:
Speed-dial number
The number dialed in Step 3 can be up to 30 digits long including the following special codes:
Use the scroll key to enter special characters; use the
the inserted character and continue. Press # # to complete the entry.
Example: To create a System Speed Dial number that dials 9, then 972-555-5644, then pauses for
four seconds and finally dials #104, enter:
9 9 7 2 5 5 5 5 6 4 4 (then scroll to) P # (then scroll to) P # (then scroll to) # # 1 0 4 #
Deleting a speed dial number
To delete an entire speed dial number and name, delete the location number (6 X X) by pressing HOLD
or the left scroll key ( ) during Step 1 in the speed-dialing procedure described above.
1. 2.
Name
601 AUTO RENTL
Code What it produces
# # DTMF tone
DTMF tone
F Flash hook
P 2-second pause
Function 1: System parameters
3.
Number
915552221212
scroll key to backspace. Press # to confirm
B.3