Start Button; Combination Switch; Overview Of Indicator Lights (All Eu Models, All Us Models) - Husqvarna FC 350 2023 Owner's Manual

6 CONTROLS
6.5
6.6
6.7
16

Start button

F03650-10

Combination switch

F03761-10

Overview of indicator lights (All EU models, All US models)

A01223-11
1
Start button is fitted on the right side of the handlebar.
Possible states
• The start button is in the basic position
is pressed – In this position, the starter
• The start button
motor is actuated.
The combination switch is fitted on the left side of the handlebar.
Possible states
STANDARD – STANDARD mapping is activated
1
when the indicator lamp
STANDARD with TC – STANDARD mapping with
1 TC
traction control is activated when the indicator
A
lamp and the TC indicator lamp light up.
ADVANCED – ADVANCED mapping is activated
2
when the indicator lamp
ADVANCED with TC – ADVANCED mapping with
2 TC
traction control is activated when the indicator
B
lamp and the TC indicator lamp light up.
The engine characteristic can be changed using button
2
button on the combination switch.
Traction control can be activated using the TC button
combination switch.
Launch control and the quickshifter can also be activated using
the combination switch.
Possible states
Malfunction indicator lamp lights up/flashes orange
– The OBD has detected a malfunction in the vehi-
cle electronics. The malfunction indicator lamp also
lights up if traction control is activated and the speed
limiter intervenes.
TC indicator lamp lights up orange – TC is enabled
or is currently intervening. The TC indicator lamp
flashes if launch control is activated.
QS indicator lamp lights up blue – The quickshifter
is activated. The QS indicator lamp flashes when the
quickshifter is being programmed.
A
Indicator lamp
– STANDARD mapping is activated.
B
Indicator lamp
– ADVANCED mapping is activated.
A
lights up.
B
lights up.
1
3
on the
lights up white
lights up green
and