Table of Contents
Advertisement
6 CONTROLS
6.4
6.5
6.6
16
Kill switch
V01543-10
Electric starter button
S01195-10
Combination switch
H02887-01
1
Kill switch
is fitted on the left side of the handlebar.
Possible states
in basic position – In this position, the ignition
•
Kill switch
circuit is closed and the engine can be started.
pressed – In this position, the ignition circuit
•
Kill switch
is interrupted, a running engine stops, and a non-running
engine will not start.
1
The electric starter button
handlebar.
Possible states
•
Electric starter button
•
Electric starter button
starter motor is actuated.
The combination switch is fitted on the left side of the handlebar.
Possible states
STANDARD – STANDARD mapping is activated
1
when LED 1 lights up.
STANDARD with TC – STANDARD mapping with
1TC
traction control is activated when LED 1 and TC light
up.
ADVANCED – ADVANCED mapping is activated,
2
when LED 2 lights up.
ADVANCED with TC – ADVANCED mapping with
2 TC
traction control is activated when LED 2 and TC light
up.
The engine characteristic can be changed using button MAP on
the combination switch.
The launch control and the traction control can also be activated
using the combination switch.
is fitted on the right side of the
in basic position
is pressed – In this position, the
Advertisement
Table of Contents
