Start Button; Combination Switch; Overview Of Indicator Lamps - Husqvarna FS 450 2020 Owner's Manual

6.5

Start button

6.6

Combination switch

6.7

Overview of indicator lamps

1
Start button is fitted on the right side of the handlebar.
Possible states
• The start button
• The start button
motor is actuated.
H01727-10
The combination switch is fitted on the left side of the handlebar.
Possible states
STANDARD – STANDARD mapping is activated
1
when LED 1 lights up.
STANDARD with TC – STANDARD mapping with
1TC
traction control is activated when LED 1 and TC light
up.
ADVANCED – ADVANCED mapping is activated,
2
when LED 2 lights up.
ADVANCED with TC – ADVANCED mapping with
2 TC
traction control is activated when LED 2 and TC light
up.
The engine characteristic can be changed using button MAP on
the combination switch.
The launch control and the traction control can also be activated
using the combination switch.
H02887-01
Possible states
Malfunction indicator lamp lights up/flashes orange
– The OBD has detected an error in the vehicle elec-
tronics. Come safely to a halt, and contact an autho-
rized Husqvarna Motorcycles workshop.
Malfunction indicator lamp flashes orange rapidly
– Launch control is activated.
V01423-01
is in the basic position
is pressed – In this position, the starter
CONTROLS 6
17