Operation Instructions - FDS FD215CV-C-5 Installation And Operation Manual

Operation Instructions

The FD215CV-C-5 is continuously on but can be de-energized by removing power from the video
system. No pilot or aircrew action is necessary during flight or ground operation.
The operator will be able to change the video output from the FD215CV-C-5 using the video source
select button on the display.
When applying 28VDC power, the display will turn on and look for a valid input on the last known
source. If no input is found, the display will go to standby mode. Pressing the Select button will
select new video input.
© 2017 FDS Avionics Corp.
All Rights Reserved.
Document Number:
MAN – FD215CV-C-5
20 N/C
21 N/C
22 TMDS clock shield
23 TMDS clock+
24 TMDS clock-
C1 N/C
C2 N/C
C3 N/C
C4 N/C
C5 N/C
Revision Date:
Rev:
B
Page 13 of 25
TECHNICAL SUPPORT
470-239-7421 or FDSAvioncis.com
01/10/2017