Quad Screen Or Full Screen - FDS FD215CV-C-5 Installation And Operation Manual

Quad Screen or Full Screen

This display has the capability to display a quad screen or full screen from any of the four HDSDI
inputs. The image seen here is the bottom view of the FD215CV-C-5 Widescreen HD Monitor.
Connecting the SDI input to the output of the attached quad box on the unit will enable the operator
to view any image from any of the connected screens on board the aircraft. Simply connect the
other units to the inputs labelled 1 through 4 on the quad box to initiate the connection.
The button display below is centrally located on the bottom of the bezel display of the unit. The
number keys will allow you to look at that connection display or the user can use PIP (Picture in
Picture) to set their own preference. The QUAD button will display all connected HDSDI inputs at
once. The SWAP Button will enable the user to move around through the multiple HSDSI
connections.
© 2017 FDS Avionics Corp.
All Rights Reserved.
Document Number:
MAN – FD215CV-C-5
PIP
C S Q
O W U
M A A
P P D
4 3 2 1
1 2 3
TECHNICAL SUPPORT
470-239-7421 or FDSAvioncis.com
Revision Date:
Rev:
01/10/2017
B
Page 15 of 25
4