Wiring Suggestions - FDS FD215CV-C-5 Installation And Operation Manual

Wiring Suggestions

Shields used on wire bundles and power should be grounded to the connector at the source
and left floating at the display. Shields for USB, SDI data, and video should be connected at
both ends.
Avoid routing video wiring parallel to:
 AC wiring
 Strobe wiring
 DC motor supply cables
 Inverter cabling
 Or any other potential noise source.
We recommend coax cables be terminated using solder sleeve coaxial cable
terminators such as Raychem Part Number CWT-4174-W122-5/9.
© 2017 FDS Avionics Corp.
All Rights Reserved.
Document Number:
MAN – FD215CV-C-5
Revision Date:
Rev:
B
Page 5 of 25
TECHNICAL SUPPORT
470-239-7421 or FDSAvioncis.com
01/10/2017