Connecting The Printer Power - HID FARGO DTC1250E User Manual

PLT-01668, Version: 1.2

2.6 Connecting the Printer Power

To connect power to the printer, follow this procedure.
Note: Do not connect the printer's USB cable until prompted during the printer driver installation.
1. Plug the AC adapter power cable into the back of the printer.
2. Plug the wall power cable into the AC power adapter.
3. Plug the wall power cable into a standard 100-240VAC power outlet.
4. Press the printer's power button to power on the printer.
Note: The printer powers down during the "sleep time" but automatically powers up when a print
job is sent.
December 2016
Setup and Installation Procedures
Page 2-7