Defined Area; Method For Defining A Single Area; Method For Defining Multiple Areas - HID FARGO DTC1250E User Manual

4.8.1

Defined Area

The Defined Area option can be used with the K Panel Resin or the Overlay / Print Area tabs to
define one or more specific areas.
In the samples, the defined area is indicated by the dashed outline.

4.8.1.1 Method for Defining a Single Area

1. On the Overlay / Print Area or K Panel Resin tab, select Defined Area(s).
2. Print a card and look at it in the same orientation as when it exits the printer.
3. Measure the total size of the area and enter the dimensions into the dimension boxes.
4. Measure from the lower-left corner of the card to the lower-left corner of the defined area and
enter the values into the X and Y boxes.

4.8.1.2 Method for Defining Multiple Areas

1. On the Overlay / Print Area or K Panel Resin tab, select Defined Area(s).
2. Print a card with a defined area and look at it in the same orientation as when it exits the printer.
3. Measure the defined area location based on the printed card.
4. To define another area, click the Defined Area up-arrow.
5. Use the Defined Area arrows to navigate back and forth from area to area.
Page 4-36
Printer Preferences PLT-01668, Version: 1.2
December 2016