Connecting The Printer Power - HID Fargo DTC4500 User Manual

© 2010 HID Global Corporation

Connecting the Printer power

Follow this procedure. (Note: Do not connect the Printer's USB cable until prompted during the Printer
Driver installation.)
Step Procedure
1 Plug the AC adapter power cable into the back of the Printer.
2 Plug the wall power cable into the AC power adapter. This display shows
Printer from behind with AC power cable.
3 Plug the wall power cable into a standard 110VAC power outlet.
4 Press the left ON/Off Button to power up the printer.
DTC4500 Card Printer/Encoder User Guide
All rights reserved
27