Safety Messages; Safety Messages - United States - HID FARGO DTC1250E User Manual

Hide thumbs Also See for FARGO DTC1250E:
Table of Contents

Advertisement

PLT-01668, Version: 1.2
1.2

Safety Messages

1.2.1

Safety Messages - United States

Symbol
Danger:
ESD:
Caution:
Caution:
December 2016
Critical Instructions for Safety Purposes
Failure to follow these guidelines results in personal injury or death.
To prevent personal injury or death:
• Reference the following safety messages before performing an operation.
• Always remove the power cord prior to performing repair procedures, unless
otherwise specified.
• Ensure only qualified personnel perform these procedures.
This device is electro statically sensitive. You may damage the device if exposing it to
static electricity discharges.
To prevent damage:
• Reference the following safety messages before performing an operation.
• Observe all established Electrostatic Discharge (ESD) procedures while handling
cables in or near the Circuit Board and Printhead Assemblies.
• Always wear an appropriate personal grounding device.
• Always remove the Ribbon and Cards from the Printer before making any repairs,
unless otherwise specified.
• Remove jewelry and thoroughly clean hands before working on the Printer.
This symbol warns of an electrical hazard that could result in personal injury or death.
For safety purposes, do not use Ethernet for a direct connection outside of the building.
Specifications
Page 1-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fargo dtciiFargo dtc1000meFargo dtc4250e

Table of Contents