PLT-01668, Version: 1.2
4.5 Image Calibrate
Use the Image Calibrate tab to control the position of the printable area in relation to the card.
Use the Vertical and Horizontal image position controls to adjust the position of the overall print area
to be precisely centered on a card. The maximum value for the Vertical and Horizontal adjustments is
±100 pixels (10 pixels = approx .03%, .8mm).
Field
Vertical
Horizontal
December 2016
Description
Use the Vertical adjustment to move the image toward the rear of the printer, if the
adjustment is a positive number. Enter a negative number to move the image toward
the front of the printer.
Use the Vertical adjustment to move the image toward the rear of the printer, if the
adjustment is a positive number. Enter a negative number to move the image toward
the front of the printer.
Printer Preferences
Page 4-25