Terminal-System Interconnection - Omron 8025G Maintenance Manual

INSTALLATION AND CHECKOUT
SECTION 2
2.3.3 External Connections
All external connections are made at the rear of the terminal. Figure 2-8
identifies the external connectors. Table 2-1 defines the terminal-data system in-
terconnects.
2.3.4
Figure 2-8. 8025 CRT Terminal: rear panel
connectors.
Table 2-1. Terminal-system interconnection .
.
-8025 CRT TERMINAL
REAR PANEL CONNECTOR
CONNECTS TO
J201
Communications modem
J202
Auxiliar~ storage
J203
Printer
J206
117 V ac line
RS-232 Speed Adjustment
The Auxiliary Storage and Printer RS-232 interface cards are set for 1,200
baud, parity off. The speed for these cards can also be set for 110, 300, 1,800 and
2,000 baud. If a speed change is required, refer to Section 7.
2.4 ON-LINE CHECKOUT
Connect the 8025 CRT Terminal into the system. Use the system terminal
operating procedure to determine that the 8025 terminal operates correctly in the
system.
2-8