Omron 8025G Maintenance Manual page 30

INSTALLATION'AND CHECKOUT SECTION 2
2.2 OFF-LINE CHECKOUT
2.2.1 Mechanical Inspection
External Inspection. Inspect the terminal for external damage such as broltell
keys or cracked cabinet. Should there be any damage, refer to paragraph 1.3.1 in
Section 1.
If
there is no damage, perform the operational check described in paragraph'
2.2.2. Proceed with installation if the terminal is operating correctly. Should the
terminal not operate correctly, first check that line voltage is present and the fuses
are intact. Then remove the cabinet and make an internal inspection.
Cabinet Removal. To take off the top of the cabinet, remove the five
screws (three on the front, two on the back) as shown in Figure 2-1 and Figure
2-2. Lift the cabinet top straight up. With the top portio« of the cabinet
removed, the internal assembly is easily reached.
Figure 2-2. Cabinet mounting screws (rear).
2-2