Connection Of Fc Cable - NEC T30A User Manual

2.1.2 Connection of FC Cable

Connect the FC drive of the product to a server or switch by using an FC cable. The product has
an FC connector on the back. Be sure to connect the FC cable to Port A. Before connecting the
cable, remove the white protection caps.
(* The product will not work if the cable is connected to Port B.)
(Connector on the upper side of the drive; shown on the right is the connector with the caps
removed.)
For information about how to connect a server or switch, see the manual accompanying the server
or switch.
After connecting the cable, make sure it is connected securely.
The FC cable's connector includes a locking mechanism.
Make sure it is set to the locked position.
-28-