Figure 5-27 Trap List - NEC T30A User Manual

5. Trap List
Enter the addresses to be notified via SNMP trap when the specified event occurs in the Library.
When clicking address part, following screen is displayed.
After setting "Address", "User name", "Authentication" and "Privacy", click "Submit" to register
a trap list. In setting Authentication or Privacy, a password is needed.
Set Notice level at the levels other than Disable to enable to make the trap list who registered
effective.
Moreover, Version of SNMP can be set.
It corresponds in Version:V2/V3 and it is possible to correspond to inform by checking the check
box on the side of the item of Version at the setting.
6. Test button
Click this button to send a test trap for confirmation of SNMP notification, to the addresses
registered under "Trap List".

Figure 5-27 Trap list

-111-